Brewing Guide
Warranty Information
Limited Warranty
The Flair Espresso Maker’s Press Stand and Brewing Cylinder are warranted against functional defects for 5
(five) years from the purchase date, when used in accordance with all operating instructions. Parts that are
more subject to normal wear and tear, such as O-rings, Silicone Sleeve, Piston, and Portafilter are warranted
against defects in material, design or workmanship for 6 (six) months from the purchase date, although these
items are expected to last beyond the warranty. Proof of purchase is required to validate the warranty period.
The warranty applies only when the product and parts are used in accordance with all operating instructions.
The warranty becomes void if the product or parts are modified, abused or improperly used, damaged by
accident or neglect, or if any parts are improperly installed. Call Customer Service with any questions about a
possible defect. All defective product claims will be handled on an individual basis by our Customer Service
that will ask you to describe the problem and provide the purchase date and location. Upon confirmation of
the defect, we will give you a Return Material Authorization (RMA) for you to use and return the product or
defective part. The RMA number must be clearly written on the side of the shipping box in which you return the
product. Unless otherwise instructed by us, the product or parts must be sent freight prepaid to our company
address and not to the store it was purchase from. Intact Idea makes no other warranties, express or implied,
and specifically excludes warranties of merchantability and fitness for a particular purpose. Intact Idea’s liability
under this warranty shall be limited to repair or replacement of the defective part(s), whichever may apply.
Intact Idea shall not be responsible for any damages or personal injuries, whether incidental or consequential,
or claims for such damages based on any legal theory, which may occur while using this product. This warranty
gives you specific legal rights, and you may also have other rights which may vary from state to state and country
to country.
27324 Camino Capistrano, Suite #211, Laguna Niguel, CA, 92677 USA
[email protected] • www.flairespresso.com
888.353.5339 or +1.949.449.9988 (Outside the U.S.)
© Intact Idea, All Rights Reserved
Flair is a trademark of Intact Idea, LLC. – Product designed in California, USA - Made in China
After You Brew
Troubleshooting & Support
www.flairespresso.com/brewguide
For additional information on how to best use
your Flair, including video demonstrations,
coffee suggestions and accessories, please visit
us online at:
We want you to love your Flair! Our team is
standing by to help troubleshoot any issues
that may arise. If you experience any problems,
please contact us immediately at:
Cleaning Your Flair
How to Store Your Flair
To remove used espresso grinds from your
Flair you can knock them out against the side
of a trash can. In addition, you can invert the
portafilter and gently blow into the opposite
end, or dig the grounds out with a utensil.
Once the grounds are removed, rinse all
brewing parts in cool water.
Do not clean in a dishwasher.
Remove the Piston with
Measuring Cup
Hand Wash Only
1
2
3
4
