SW1210-16CB
1. Overview:
The Inaxsys SW1210-16CB switching power supply/distribution unit converts 120VAC input into 12VDC
at 11 amps of continuous supply current. The built-in 16-output distribution board allows for power
delivery across multiple outputs while offering electronically fused protection on each circuit. This general-
purpose power supply has a wide range of applications for access control, security and CCTV systems
that require additional power. For convenient installation, the unit comes completely assembled with a
compact steel enclosure, power cord and all connecting hardware.
2. Features:
●
Designed for quick installation
● Individually protected, electronically fused outputs
Built in battery backup/charger on selected models(see below)
● Short circuit isolation technology for uninterrupted operation
Class 2, Power limited outputs
● Removable output terminal blocks for quick installation
● Diagnostic LEDs for quick troubleshooting
Automatic switch over to stand-by battery
● AC line cord included
● Lifetime warranty
3. Specifications:
UL listed to UL-60950 Information Technology Equipment.
CE/LVD EN60950-1
CE/EMC:EN55022,EN55024
FCC PART 15, ICES 003-2012
●
Maximum temperature range:-20° C to 40° C; (For indoor use only.)
● Relative humidity: 20%
～
90%
85% of Efficiency with full load.
Maximum ripple 150mVp-p, Maximum noise 200mVp-p
Built-in charger for sealed lead acid battery.
Individual outputs current limited at 2.5 Amps per circuit.
Maximum battery charge 500mA (Subtract from total output).
Red LED’s indicate DC power presence on each circuit.
Products
Power output
Number of
outputs
Battery
Charger
Enclosure dimensions
SW1205-4CB
[email protected] Amps
4
Yes
9.25”. x 8.25” in. x 3.5”
(23.3 cm x 21 cm x 9 cm)
SW1205-8CB
[email protected] Amps
8
Yes
9.25”. x 8.25” in. x 3.5”
(23.3 cm x 21 cm x 9 cm)
SW1210-8CB
12VDC@11 Amps
8
Yes
17”L x 13.5”W x 4.75”H
(43.2 cm x 34.3cm x 12.06 cm)
SW1210-16CB
12VDC@11 Amps
16
Yes
17”L x 13.5”W x 4.75”H
(43.2 cm x 34.3cm x 12.06 cm)
Note:
When using the battery charger for backup /charging, 500mA needs to be subtracted from the total
output power listed above in table.
