Inateck BCST-55, Instruction Manual

Page: 29 / 67

Enter Setup
Exit and Save
24
Bluetooth GATT Mode
Bluetooth GATT Mode is not the default mode. To enter this mode, please scan “Enter
Setup”——”Bluetooth GATT Mode”——”Save and Exit”.
Bluetooth GATT Mode
Bluetooth GATT mode provides a communication interface for developing Bluetooth APP
programs. In Bluetooth GATT mode, scanners can be seamlessly connected to the Bluetooth
APP developed by users. While developing Bluetooth APPs, users can use the software
named "nRF Connect" for debugging, which can be downloaded from mobile app stores.
Set Bluetooth Name
The BCST-55 features Bluetooth name setting with length limited to 32 characters. To
change the Bluetooth name, please first make sure the BCST-55 is under Bluetooth HID or
GATT mode and then scan the "Enter Setup" - "Set Bluetooth Name" - "Bluetooth Name"
(Scan the corresponding character barcodes in the appendix) - "Exit and Save" barcodes.
Note: Please cut the scanner from wireless Bluetooth connection with your phone or
computer and delete the pairing history on your phone and computer after modifying the
Bluetooth name. Reconnect the scanner with your phone or computer via wireless
Bluetooth connection again to reveal the new Bluetooth name.
For example, to change the Bluetooth name to "Tom", you may follow the steps below:
1. Scan the "Enter Setup" barcode.
2. Scan the "Set Bluetooth Name" barcode.
3. Scan the "T" character barcode in the Appendix I.
4. Scan the "o" character barcode in the Appendix I.
5. Scan the "m" character barcode in the Appendix I.
6. Scan the "Exit and Save" barcode.
Set Bluetooth Name