2022-05-11 | 2000382
Connect the instrument to the Twist-Lock cable
and twist until it clicks into place.
Remove the cover from the Control Point 2.0
(also compatible with the Partech 7300w
2
Monitor). Wire the cable into the terminals
1
Attach the Twist-Lock
cable to the probe.
Wire the other end of
the cable.
2
Reinstall the terminal cover. Connect power to
the controller and turn it on. Press
Menu
.
Use the arrow keys to select
Sensor Config
.
Power up the Control
Point 2.0 or 7300w2.
3
4
Configure.
4
RDO-X Stainless Steel Instructions
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, HydroVu™, iSitu,
Pocket-Situ, RDO, RuggedCable, RuggedReader, SmarTROLL™, TROLL, VuSitu, and Win-Situ are trademarks or registered
trademarks of In-Situ Inc.
©
2016. All rights reserved. This product may be covered by patents identified at www.in-situ.com/
patents
