in10S2x2L & in11S2x2D Compact WDR Cameras
Quick Start Guide
Before operating this product, please read this quick-start guide to ensure proper use.
Please store these instructions a safe place for future reference.
FEATURES
• Compact Design
• High Sensitivity sensor
• 800TVL Resolution
• 0.01 Lux
• Wide Dynamic Range
• HLC, BLC, DEFOG
• Sens Up
• On Screen Menu
• 12VDC or Dual Power Models
• Optional UTC Programmer
PRECAUTIONS
1. Before installing and operating the unit, please read this manual carefully.
2. Precision components are contained in this camera, please avoid violent vibrations during
installation and maintenance. Do not connect the power until you have completed the
installation.
3. Please obey all local electrical wiring regulations when using this unit.
4. Do not use abrasive or corrosive materials for cleaning. Use only a soft cloth for cleaning.
5. To prevent damage to the lens or sensor, do not point the camera directly into the sun
or very strong light sources.
6. Do not use the camera outside it’s working temperature (-10°C~ 50°C / 14°F ~122°F) or
humidity (<90%) ranges.
7. Ensure that the power supply meets the current requirements of the camera and that
the supply voltage is inside the tolerances of the camera: 24VAC ±10%
8. Ensure that the fixings used are adequate to support the load of camera.
9. In case of camera failure, do not attempt to dismantle or service the camera yourself.
Please refer to qualified service personnel for repair of the camera.
CONNECTIONS/CONTROLS
1. BNC Connector. Video Output. 75Ω 1Vp-p
2. DC Lens connector
3. Power LED
4. OSD joystick
5. Removable power connector. Observe
polarity of 12VDC connections. 24VAC
connections are not polarity conscious.
Polarity markings are visible when the
terminal block is removed
LENS & BACK FOCUS
A CS-mount lens should not normally require any back focus adjustment when
mounted on the camera. If back focus adjustment is required, slacken the grub screw
①
, using the supplied allen key and rotate the lens mounting ring
②
until optimum
focus is achieved. Re-tension the grub screw to lock the mounting ring.
If a C-mount lens is used, a C-mount adaptor(not supplied) must be fitted to the
lens mounting ring before attaching the C-Mount lens, or the sensor/filter may be
damaged.
OSD ACCESS
- +
~ ~
UP
RIGHT
LEFT
DOWN
PRESS ENTER
Connect the Video-Out of the camera to a display monitor.
To activate the camera OSD, depress the joystick button on the rear panel of the
camera.
Push the joystick
to select a menu from the list.
Push the joystick
to change the selected value.
Press the joystick button to open a sub-menu or execute a command.
Optional Programming Method
MENU
Exposure..
Day/Night..
WhiteBalance..
Display Adjust..
Connect the Video-In connector of the UTC controller to the Video-Out connector
of the camera. Connect the Video-Out of the UTC controller to a display monitor. To
activate the camera OSD, depress the joystick button on the UTC Controller (operation
is confirmed when LED is latched on).
Push the joystick
to select a menu from the list.
Push the joystick
to change the selected value.
Press the joystick button to call the sub-menu or execute a command.
To return from a sub-menu to the previous menu, select “Return” and press the
joystick button.
OSD MAIN MENU
When the OSD menu is launched, you are
presented with the adjacent opening screen.
A menu option followed by a
indicates the
presence of a sub-menu. Options set to OFF
will not show a
until set to ON
Use RETURN
to return to the previous menu.
LENS menu:
•
MODE
- DC or manual selection
Indoor -
Default, set to fixed values
Outdoor-
Iris and shutter will auto
adjust to lighting situation.
•
LENS
- Used to optimise iris level using
damping load.
EXPOSURE menu:
•
SHUTTER
- Auto, Manual, FLK selection, 1/60~1/50K. (1/50~50K PAL) Set
this on to reduce the exposure time
of each image. This can be used to
reduce blur in images with fast changing
content. FLK mode; Use this when
flicker is observed in the image under
fluorescent lighting. When WDR is ON,
the shutter menu is disabled.
•
AGC- Off or Level Control -
Used to
adjust overall gain.
•
SENS UP -
Slows frame rate and
increases low light sensitivity.
•
BRIGHTNESS -
Sets the level of the overall brightness
•
D-WDR -
Actively controls gamma compensation to provide optimal
image exposure in images with extremes of lighting. When WDR is ON
the D-WDR menu is disabled.
•
DEFOG-
Improves the clarity of image obscured by fog by analysing the
brightness of the image and compensates the color of the image.
•
BACKLIGHT - BLC or HLC
Adjust the area to be enhanced and sets the
level for
BLC
.
HLC
is the ability to reverse bright points to black or gray,
(areas such as headlights, any high luminance areas) this function will
improve the overall picture. When WDR is ON the backlight menu is
disabled.
WDR
WDR
- On,Off
•
GAIN
- Low, Middle, High - Sets level of
WDR .
•
WDR OFFSET
- Used to improve contrast
in bright/dark areas.
Rev 0.1
MAIN MENU
LENS
DC
EXPOSURE.
WDR
OFF
WHITE BAL
ATW
DAY&NIGHT
AUTO
NR
SPECIAL
ADJUST
VIDEO OUT
NORMAL
RESET
EXIT
SAVE
EXPOSURE
SHUTTER
AUTO
AGC
ON
SENS-UP
AUTO
BRIGHTNESS
40
D-WDR
OFF
DEFOG
OFF
BACKLIGHT
OFF
RETURN
RET
LENS
LENS
MODE
INDOOR
LENS
ADJUST
RETURN
RET
EXPOSURE MENU
WDR
GAIN
MIDDLE
WDR OFFSET
RETURN
RET
- +
~ ~
Rotate
