－
4
－
VM-4424S/H Instruction Manual
(Compatible with Version 2.16 or later)
1. Introduction
Thank you for purchasing Portable Vibrometer “VM-4424S/H”.
Please read this manual carefully before use and follow the cautions below for your safety.
Safety Precautions
This chapter describes several items which we would like to you observe in order to use
the product safety and prevent injury to customers and other persons and damage to
property.
Please be sure to read this instruction manuals and attached documents before
use, and fully understand the contents for use.
After reading this manual, be sure to place it in a location so that you can always refer to it.
●
Expressions of safety instructions
Calls attention to a procedure, practice, or condition that could possibly
cause death or bodily injury.
Calls attention to a procedure, practice, or condition that could possibly
cause bodily injury or damage to instrument.
Represent handling precautions or notes on product specifications.
Indicates product specification information and actual usage information.
●
For safe use
In case of the place of objective instrument is high temperature, near rotating
shaft and near a moving element, the mounting of pick-up, please go to when
the machine is stopped.
In such a place, measuring the vibration with pick-up in one’s hand, it causes
burn injury and cable engulfment. It is very dangerous, please stop
absolutely.
Stop using the instrument, when producing smoke, bad smell or noise. It
causes fire or shock hazard.
Turn off the power switch and unplug the power cable from outlet as soon
as possible, please contact the agency or IMV.
To reduce risk of injury, take
it to a qualified serviceman when service or repair is required.
Do not substitute parts or modify instrument.
It causes bodily injury, fire or shock hazard.
Stop using the instrument, when an object or liquid falls/spills into the
instrument. It causes fire or shock hazard.
Turn off the power switch and unplug the power cable from outlet as soon
as possible, please contact the agency or IMV.
Do not expose the instrument to moisture or dust.
If causes fire or shock hazard.
When replacing or disposing of the battery, follow the precautions on the
battery.
Also, pay attention to the polarity when replacing.
When the product is not used for a long time, turn off the power switch and
store it with the battery removed.
Storing the battery with the battery inside may cause a malfunction due to
liquid leakage.
Danger
Warning
Caution
Danger
Warning
Warning
Warning
Caution
Caution
Caution
