IMT Analytics CITREX H3, User Manual

Page: 10 / 46

Start-up
10
5
IMT Analytics AG
CITREX H3 can be operated from the mains or from the integrated battery.
Power can be supplied via the USB port (Mini-B) on the top of CITREX H3. Use the
power supply unit included to charge the battery or operate the device via the USB
port. You will find more information about power supply in the section "Electrical
interfaces".
During the charging process a green battery symbol is lit on the front.
Please connect the power supply unit included to a voltage of 100 VAC to 240 VAC
with a frequency of 50 Hz to 60 Hz.
USB port
Figure 1: Power supply
Before switching on, make sure the operating voltage of the power
supply unit agrees with the local mains voltage. You will find this
information on the rating plate on the back of the power supply unit.
When operating CITREX H3 via the USB port only use the original
power supply unit included!
The device indicates visually and audibly when the battery has to be
charged. Please do not store the battery in a depleted state.
Caution: depletion can damage the battery beyond repair!
5.1 Power supply