2
Thank you for choosing this JBDC product! Please read the instructions carefully before installing, using the product, or before maintenance in order
to
avoid accidents, and keep the manual in a safe place for future reference.
JBDC cannot be held responsible for damage to persons or items, as a result of using the machine in the following circumstances:
-
Modification or neutralisation of safety elements has been undertaken
-
Safety recommendations written in this manual have not been adhered to
-
Modification of the product’s specifications
-
Use of accessories not specified by the manufacturer
-
Failure to observe regulations specific to the country or state in which the machine is used.
1. PRESENTATION, SAFETY RECOMMENDATIONS AND GENERAL PRECAUTIONS
This product has been designed to carry out the following operations in car body workshops:
- Spot welding on metal sheets with a pneumatic clamp,
- Welding of metal sheets with a single sided gun,
- Welding of nails, rivets, washers and studs,
- Repair of bumps and dents (small dents, i.e. from hail or small stones with the « quick repair” option)
GENERAL PRECAUTIONS
1. Operators must have received appropriate training.
2. Repair and maintenance operations must only be carried out by qualified personnel.
3. The operator is responsible for respecting the car manufacturer’s recommendations regarding the protection of the car's electrical and electronic
equipment (on-board computer, car radio, alarm, air bags, etc…).
4. Ensure compressed air supply is disconnected and depressurised before any repair or maintenance operation is carried out.
5. The electrodes, arms, and other secondary conductors can reach a very high temperature and remain hot for a long time after the machine has
stopped. Pay particular attention to the risks of serious burns.
6. It is necessary to make a regular preventive maintenance on the machine.
MAINS SUPPLY
1. The unit must be connected to an earthed power supply - ensure that the earth connection is in good condition.
2. Ensure the workbench is connected to the earth.
3. Dry, protective clothing and accessories must be worn before working with the metal.
Make sure that the operator has no contact with the metal parts to be welded without any protection or with wet clothes.
4. Avoid contact with the welding pool.
5. Do not undertake welding, or place the machine, in wet areas or on wet flooring.
6. Ensure all welding cables are in excellent condition before undertaking any work. Ensure that any defects in isolation, cables, or connectors are
addressed, and that equipment is checked for any gas, or coolant liquid leaks, before commencing work.
7. Before performing any control or maintenance operation, switch off and disconnect the unit directly from the electricity supply.
EYE AND BODY PROTECTION
1. During the welding process, the operator must protect themselves from possible metal projections: leather gloves, welding aprons, safety shoes,
welding helmets or glasses for filtering radiation and projections. Similarly, during grinding or hammering operations, the operator must wear eye
protection.
2. The tightening force of the clamp can reach 550 daN. Keep all body parts away from the mobile elements of the clamp to avoid any risk of injury -
particularly to fingers and other small extremities.
3. Do not wear rings, watches, or jewellery, as metal current conductors can cause serious burns.
4. All protection boards must be in good condition and kept in place.
5. Never look at a welding arc without eye protection.
6. Protect the environment surrounding the work area from projections and reflections.
FIRE
1. Do not undertake welding near flammable material as sparks may cause fire.
2. Ensure that there is a fire extinguisher in close proximity to the operator
3. Ensure the machine is used in an area with adequate ventilation.
4. Do not weld on, or near, combustible or lubricant containers or those used to contain flammable material, even if empty.
5. Do not weld in an atmosphere charged with flammable gas or fuel fumes.
ELECTRO-MAGNETIC COMPATIBILITY
When using the welding equipment, ensure that:
- There are no other power supply cables, control lines, or any sensitive electronic devices (mobile phones, radios, computers, medical equipment
etc…) in the vicinity of the machine.
- People using electronic medical devices (such as pacemakers, or hearing aids) should consult their doctor before using this device. Take extra
protections if other products are to be used in the vicinity of the machine.
- The battery is disconnected from the vehicle.
We recommend you to take the machine away at the maximum from all the devices of the vehicle (calculators, relay, embedded
computer…)
Summary of Contents for SPOT 14500 TRAFO
Page 4: ...4 Montage ...
Page 27: ...27 Arm types for the C clamp ...
Page 30: ...30 9 CIRCUIT DIAGRAM ...
Page 31: ...31 10 COOLING LIQUID CIRCUIT 11 CLAMP CABLE BEAM CONNECTIONS ...
