9
•
Check the colour marked on the fine sand finish label matches the
colour listed on the primer and is as ordered.
•
Apply fine sand finish coat
Equipment:
•
Stainless Steel float
•
Smooth plastic float
Method:
•
Application temperature 5˚C- 30˚C
•
Do not apply if frosty/raining or frost/rain are anticipated
•
Thoroughly mix the product until it is an even
consistency
•
Avoid creating air bubbles or foam
•
Apply the coat in an even thickness
•
Finish off with smooth plastic trowel. Dry clean the
trowel during texturing
•
Protect from rain during and immediately after
application
Cleaning:
•
Tools & hands should be washed with water before the
product dries
Consult:
•
Parex Fine Sand data sheet for further detailed supplier
information
Step 14
Piccolo shown
•
Allow oven to fully dry out for 24 hours under normal conditions
•
In low temperatures or periods of high humidity drying time will be
longer
Step 16
Piccolo shown
•
Before first use remove any plastic coating fromthe metal work.
•
Any splashes of render, primer or fine sand finish can be removed
with a plastic scouring pad and warm water
Step 17
•
Cure the oven before first use
Step 18
•
With the oven door lifted, loosen and remove the mounting screw
•
With the longest edge uppermost slide glass plate between the rails
•
Ensure equal spacing all round
•
Re-insert the screw and tighten
Step 15