Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
98
of
170
Rev 1.0
Data Correction Panel
These parameters enable data correction and image improvements with Look-up tables and file
corrections.
LUTEnable
Selects LUT to be used in processing image (LUT1 – LUT4). LUT1 and
LUT3 are pre-programmed with Gamma 0.45, LUT2 and LUT 4 are
preprogrammed with negative LUT.
FFCEnable
Selects FFC to be used in processing image. FactoryFFC has a factory
preset correction. You can create and load your FFC to FFC1–FFC7.
DefectPixelCorrection
Enables defect pixel correction. You can upload your own defect pixel
map.
DefectPixelCorrectionMode
Controls the method used for replacing defective pixels.
BadPixelCorrection
Enables Hot Pixel Correction. You can upload your own hot pixel map.
BadPixelCorrectionMode
Controls the method used for replacing hot pixels.
DefectPixelCountMax
Maximum number of pixels in the Defect Pixel Correction Table.
BadPixelCountMax
Maximum number of pixels in the Hot Pixel Correction Table.
