Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
84
of
170
Rev 1.0
Connecting to Cameras
1.
Locate and open the IpxPlayer from your desktop.
2.
Click
Camera
menu and select
Connect
(or click the camera
icon
).
The Select Camera dialog appears. The dialog lists all connected cameras. The version number refers to
the installed Imperx GUI driver
.
3.
Select a camera listed on the dialog.
Camera information appears in the Device info section of the dialog
.
4.
Click
OK
. If needed, click
Rescan
to update the list of cameras.
The first time you attempt to connect to the camera, you might need to
set the IP address if IP Subnet Mismatch appears highlighted in red and
the OK button is not available.
