Imperx Cheetah Pregius SFP-C4440, User Manual – Preliminary

Page: 44 / 170

Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020 Page
44 of 170
Rev 1.0
Acquisition Control
Acquisition Control lets you configure settings for image capture, exposure, frame rates, triggers,
and so on. It also provides read-only information on frame and exposure time.
Parameter Name Type Value Access Description
AcquisitionMode Enumeration String
SingleFrame
MultiFrame
Continuous
Num
.
0
1
2
RW Defines the number of
frames to capture during
acquisition and the way
the acquisition stops
AcquisitionStart Command WO Starts device acquisition
AcquisitionStop Command WO Stops acquisition after
current frame completes
readout.
AcquisitionAbort Command WO Stops acquisition
immediately; a partially
transferred image will be
completed.
AcquisitionFrameCount Integer Min: 1
Max: 65535
RW Sets the number of frames
to be acquired in
MultiFrame
AcquisitionMode
ExposureMode
1
Enumeration String
Off
Timed
TriggerWidth
Num.
0
1
2
RW Sets exposure mode (refer
to Exposure Control for
more information).
ExposureTime
2 Float RW Sets the exposure time in
microseconds when
ExposureMode is Timed
and ExposureAuto is Off.
ExposureAuto Enumeration String
Off
Once
Continuous
Num.
0
1
2
RW Sets the automatic
exposure mode when
ExposureMode is Timed.
AcquisitionFrameRateEn
able
Boolean RW Controls if the
AcquisitionFrameRate and
AcquisitionFrameTime
features are writable and
used to control the
acquisition rate. If On, you
can extend the actual
frame time beyond the
free-running frame time.
Trigger is disabled and
cannot be used in
combination with this
feature.
AcquisitionFrameTime Integer RW Sets Frame Time in
microseconds.