Imperx Cheetah Pregius SFP-C4440, User Manual – Preliminary

Page: 36 / 170

Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020 Page
36 of 170
Rev 1.0
Device Control
Device Control provides read-only information about the camera’s XML file and enables camera
reset functionality.
Parameter Name Type Value Access Description
DeviceVendorName String RO Provides the name of the
manufacturer of the camera
DeviceModelName String RO Provides the model of the
device
DeviceVersion String RO Provides the version of the
camera
DeviceFirmwareVersion String RO Provides firmware version of
the camera
DeviceManufacturerInfo String RO Provides extended
manufacturer information
about the camera
DeviceSerialNumber String RO Provides serial number of the
camera
DeviceUserID String RW Provides user defined name
of the device
DeviceSFNCVersionMajor Integer RO Major version of SFNC used
for XML.
DeviceSFNCVersionMinor Integer RO Minor version of SFNC used
for XML
DeviceSFNCVersionSubMinor Integer RO Sub-minor version of SFNC
used for XML
DeviceScanType Enumeration String
Areascan
Num
.
0
RO Specifies the scan type of the
sensor
DeviceReset Command WO Resets camera to power-up
state (resets both the 10G
Engine and the camera head)
CameraHeadReset Command WO Resets the camera circuitry.
The 10G Engine does not
reset. NOTE: After a camera
reset, issue a UserSetLoad
command
SensorTemperature Float RO Returns the current sensor
temperature
SensorBoardTemperature Float RO Returns the current sensor
board temperature
FPGATemperature Float RO Returns the current FPGA
temperature
FPGABoardTemperature Float RO Returns the current FPGA
board temperature.