Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
18
of
170
Rev 1.0
SFP Transceiver Module Options
The camera’s open SFP+ slot accepts a variety of commercially available SFP transceiver
modules, including Multi-mode and single mode fiber and 10GBase-T copper modules.
SFP transceiver module
SFP transceiver module
part number
Cable
length
Compatible SFP+ NIC (example)
10GBase-R fiber module
FS SFP-10GSR-85
(10G SFP+ 850 nm)
300 m
Intel 82599EN Single-Port 10G SFP+
PCie 2.0 x8
10GBase-T copper module
Cisco SFP-10G-T-S
Compatible
30 m
Intel X540-T1 10Gb,
Intel X550-T1 10Gb,
10Gtek 10Gb PCI-E
10GBase-SR Multi-Mode Fiber Example
Below is an example of a 10GBase-SR SFP+ 850 nm Multi-mode Fiber Transceiver module
(p/# FS SFP-10GSR-85) with 300 m range compatible with the Imperx SFP camera.
For optimal performance, Imperx recommends a 10G Network Interface Card with SFP+ slot.
Imperx has tested and recommends the Intel 82599EN Single-Port 10G SFP+ PCie 2.0 x8,
Ethernet Network Interface card shown below.
Available for purchase; contact Imperx sales:
For a multi-mode fiber optic connection, both the Imperx SFP camera and the NIC card must
have a 10GBase-SR SFP+ Multi-mode Fiber Transceiver installed like the one shown above.
