Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
16
of
170
Rev 1.0
Technical Support
Each camera is fully tested before shipping. If, for some reason, the camera is not operational
after power up, check the following:
1.
Check the power supply, Ethernet, and all I/O cables.
Make sure that all the connectors are firmly attached.
2.
Check the status LED and verify that it is steady ON, if not – refer to the section
3.
Enable the test mode and verify that the communication between a computer and the
camera is established.
If the test pattern is not present, power off the camera, check all the cabling, frame grabber settings,
and computer status.
If you still have problems with the camera operation, contact technical support at:
Email:
Toll Free
1 (866) 849-1662 or (+1) 561-989-0006
Fax:
(+1) 561-989-0045
Visit our website:
