Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
100
of
170
Rev 1.0
Pulse Generator Panel
The Pulse Generator provides a signal generator for camera sourced trigger or control signals.
PulseGenGranularity
Sets the Pulse Generator main timing resolution. The x1 resolution is in
microseconds. The following four granularity steps are possible: x1, x10,
x100, x1000 (x1000 is equal to 1 ms timing resolution).
PulseGenWidth
Sets the value of the pulse width in microseconds.
PulseGenPeriod
Sets the value of the pulse period in microseconds.
PulseGenNumPulses
Sets the number of pulses generated by the Pulse Generator. To set
Pulse Generator in continuous mode, set the parameter in 65536.
PulseGenMode
Sets the mode of the Pulse Generator.
PulseGenEnable
Enables the Pulse Generator.
