Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
81
of
123
Rev 1.0
DeviceReset
Resets the entire camera, including communications.
CameraHeadReset
Resets only the image sensor to default.
DeviceTemperatureSelector
Selects the location within the camera where the
temperature will be measured.
Current Temperature
Returns the current camera temperature in degrees
Celsius.
Version Info Controls
The camera contains non-volatile memory that stores manufacturing related information.
The factory programs this information during the manufacturing process.
Figure 47:
Version info parameters
SensorType
Returns the CMOS sensor type: Bayer Color or Monochrome
SensorModel
Returns the CMOS sensor model.
RgsID
The camera’s register ID number.
FpgaID
Shows the field-programmable gate array (FPGA) ID
(0=EP4C25, 1=EP4C40, 3=5CEFA4).
EpcsID
Shows the EPCS ID (0=EPCS16, 1=EPCS64, 2=EPCS128).
FirmwareImage
The Firmware Image ID (F=Factory or A=Application).
CameraHeadFirmwareVersion
The Firmware version number.
CameraHeadFirmwareBuild
The Firmware build number.
CustomerID
The Customer ID for custom firmware (0=Imperx standard
firmware).
FamilyID
The Family ID.
XmlVersion
The version of the XML file.
GevFirmwareSwVersion
Displays the camera’s firmware software version.
GevFirmwareHwVersion
Displays the camera’s firmware hardware version.
