Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
77
of
123
Rev 1.0
The first time you attempt to connect to the camera, you might need to set the IP address if
IP Subnet Mismatch appears highlighted in red and the OK button is not available (as shown
in the following figure).
Figure 44:
Access status showing IP Subnet Mismatch
To Set the IP Address:
1.
Click
Set IP Address
.
2.
When the Set IP Address screen appears, click
OK
.
3.
On the Select Camera screen, click
OK
.
After the camera connects, click the play
icon on the IpxPlayer to begin capturing and
displaying images.
