Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
34
of
123
Rev 1.0
Active Canon EF mount
The Canon EF lens mount provides active lens control for C4410, C5410, and C6410 cameras.
The cameras provide communication and power to the mount through an internal connector
on the front of the camera. The connector eliminates the need for a special power supply and
external cable between the camera and the Canon EF mount.
Figure 12:
The camera (left) and Canon EF lens mount (center) connect internally
2.7 Electrical Connectivity
The number of external inputs and outputs vary between different Cheetah cameras.
Depending on camera model, type of the available inputs or outputs (opto-isolated or TTL and
opto-isolated) may differ as well. The following table shows what inputs and outputs are
available for a particular camera model.
Table 15:
Inputs and outputs of the Cheetah Cameras
Camera model
Inputs
Outputs
Opto-isolated
TTL/LVTTL
Opto-isolated
TTL
Name
Pin
Name
Pin
Name
Pin
Name
Pin
POE-C2000,
POE-C2400
IN1
2
N/A
N/A
OUT1
4
N/A
N/A
IN1 RTN 3
OUT1 RTN
5
P67-C2010,
P67-C2410,
P67-C3210,
P67-C4010,
P67-C4110
IN1
3
N/A
N/A
OUT1
6
OUT2
8
IN1 RTN 4
OUT1 RTN
4
OUT2 RTN
5
POE-C2010,
POE-C2410,
POE-C3210,
POE-C4010,
POE-C4110,
POE-C4410,
POE-C5410,
POE-C6410
IN1
8
IN2
9
OUT2
5
OUT1
7
IN1 RTN 10
IN2 RTN 11
OUT2 RTN
12
OUT1 RTN
6
The electrical connections of external inputs and outputs are similar for all Cheetah cameras.
For more information see sections
Opto-isolated Input, 2.7.2 TTL/LVTTL Input, 2.7.3
and
Camera (front)
Lens mount (back)
