Cheetah KAC Camera User Manual | Camera Link (CLF) Interface
October 1, 2019
Page
58
of
135
Rev 7.2
Trigger De-bounce Time
This register selects the trigger signal de-bounce time. Any subsequent trigger signals
coming to the camera within the de-bounce time interval will be ignored.
Address
:
0x065C
Data (2:0)
:
000 – no de-bounce
001 – 10
s de-bounce time
010 – 50
s de-bounce time
011 – 100
s de-bounce time
100 – 500
s de-bounce time
101 – 1.0 ms de-bounce time
110 – 5.0 ms de-bounce time
111 – 10.0 ms de-bounce time
Data (31:3)
:
N/A
3.2.9 Strobe Control Registers
These registers enable and control the position and pulse width of the two available
strobes. The strobe signal is mapped to one or both of the available strobe outputs.
Strobe 1 Enable
This register enables Strobe 1
Address
:
0x0630
Data (1:0)
:
00 – disable
01 – enable for Frame A only (exposure time)
10 – enable for Frame B only (exposure time)
11 – enable for both Frame A and B
Data (31:2)
:
N/A
Strobe 1 Reference Select
This register sets the reference for the strobe 1 Start.
Address
:
0x0634
Data (0)
:
0 – Exposure Start
1 – Readout Start
Data (31:1)
:
N/A
Strobe 1 Delay
This register sets the strobe 1 delay from the selected Reference.
Address
:
0x0638
Data (19:0)
:
<value> – delay in micro sec., 1 sec max.
Data (31:20)
:
N/A
Strobe 1 Width
This register sets the strobe 1 pulse duration.
