impact Mobile Verify, User'S Setup Manual, Page: 12 / 19

12
1. Click Start.
2. Select ScanWedge.
3. Verify that all the settings are
correct as they appear on the
screen above
4. ScanWedge: Enable.
5. Beep Sound: Enable.
6. Light Mode: Ilium Aimer On.
7.Send barcode is Checked.
8.Send ENTER key after suffix is checked.
9. Click Apply.
10. Click the X in the top right corner of
the screen to exit
ScanWedge
e
1. Click Start
2. Select mobileVerify
11. Verify that the barcode scanner is working by squeezing the side buttons or the orange button on the
keypad.
( shown on the diagram below )