impact BP-RA-MBH Instructions Manual Download Page 6

One-Year Limited Warranty

This Impact product is warranted to the original purchaser to be free from defects in materials 
and workmanship under normal consumer use for a period of one (1) year from the original 
purchase date or thirty (30) days after replacement, whichever occurs later. The warranty 
provider’s responsibility with respect to this limited warranty shall be limited solely to repair 
or replacement, at the provider’s discretion, of any product that fails during normal use of this 
product in its intended manner and in its intended environment. Inoperability of the product 
or part(s) shall be determined by the warranty provider. If the product has been discontinued, 
the warranty provider reserves the right to replace it with a model of equivalent quality and 
function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, 
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, 
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY 
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you 
with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Impact Customer Service Department to obtain 
a return merchandise authorization (“RMA”) number, and return the defective product to 
Impact along with the RMA number and proof of purchase. Shipment of the defective product 
is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.impactstudiolighting.com or call 
Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

Impact is a registered trademark of the Gradus Group. 
© 2020 Gradus Group LLC. All Rights Reserved.

GG1

Summary of Contents for BP-RA-MBH







Reviews: