15
RE-TIGHTEN
After first week of use it’s a good idea to check and re-tighten any
screws / bolts.
CLEANING THE BASE
Clean the base frame by wiping it down with a microfiber cloth
moistened with a standard household cleaning solution. Never
use solvents or abrasive or corrosive compounds on the frame. The
base should be cleaned at regular intervals to remove dust and
dirt. Inspect for mechanical damage; worn or broken parts should
be replaced.
CLEANING THE DESKTOP
All desktops are manufactured with a “3D lamination” process that
results in an extremely durable surface, similar to what’s often
used in hospital environments. As such, it can stand up to most
cleaning solutions without risk of discoloration or degradation.
Anti-bacterial solutions may be used. Always test new cleaning
solutions on a less-seen surface before first using on the entire
desktop.
EXTENDED NON-USE
Unplug the power cord if you do not intend to use the desk for a
long period of time.
MAINTENANCE AND GOOD-SENSE TIPS
SPECIFICATIONS
WARNING:
Always
plug th
is desk into
a grounded, 3-prong
outlet.
Use the
power cord provided with the product.
WARNING:
The components used are quite heavy and care
should be exercised when lifting and moving the base and desk
both during assembly and during use.
CASCADE/ENERGIZE™ BASE
Lift Capacity: 220 lbs.
Height Adjustment Range: 22.5” to 48”
Range figures are based on the frame only.
For true height range figures, add your desk top thickness.
Width Adjustment Range: 48” to 72”
Noise Level: 55 dB
Travel Speed: 1.3” per second
Controller: Digital – Programmable with 2 saved positions
Feet: 23 5/8” long
Anti-Collision: Yes
Power Consumption: .1W standby
Manufacturing Origin: Europe (GSA compliant)
Warranty: 10 years on all parts
THIS WARRANTY APPLIES ONLY IN THE U.S. AND CANADA. WARRANTIES
OUTSIDE OF THE UNITED STATES MAY VARY. PLEASE CONTACT YOUR LOCAL
DEALER FOR DETAILS.
CASCADE/ENERGIZE™ TABLETOP
Lamination type: Omnova Surf(x) ultra durable
Tabletop thickness: 3/4” or 1 1/8”
Available sizes: 24” or 30” depth; 47”, 53”, 59”, 65”, 71” length
Recessed Nuts : Yes – on 1 1/8” tabletops
Grommets: Dual 60mm (2.35”) fully laminated grommet holes
Manufacturing Origin: Michigan, USA
Warranty: 5 years on the tabletop
THIS WARRANTY APPLIES ONLY IN THE U.S. AND CANADA. WARRANTIES
OUTSIDE OF THE UNITED STATES MAY VARY. PLEASE CONTACT YOUR LOCAL
DEALER FOR DETAILS.
