iWaylink Inc.
iMotion SC511 User Manual
61
Barcode length limit setting example
When setting the minimum barcode length limit, ensure that the minimum
length set is not greater than the current maximum length setting. Otherwise
an error tone will appear. Similarly, when setting the maximum barcode
length limit, ensure that the maximum length set is not less than the current
minimum length.
Set the Code 128 barcode length to 4-12 bits
1.
Scan the Code 128 minimum length limit, then scan the appendix data
and edit barcode for 4, and save it.
2.
Scan the Code 128 maximum length limit, then scan the appendix data
and edit barcode for 1, 2.
3.
Save to complete the setup.
Set the Interleaved 2 of 5 barcode length to 14 bits
To set the Interleaved 2 of 5 barcode length to 14 bits, you can scan the
Quick Set barcode ITF25 14-bit length to set it directly, or you can set it via
the barcode maximum and minimum lengths as follows:
1.
Scan the setup barcode of Interleaved 2 of 5 minimum length limit, then
scan the appendix data and edit barcode for 1, 4, and save it.
2.
Scan the setup barcode of Interleaved 2 of 5 maximum length limit, then
scan appendix data and edit barcode for 1, 4. Save to complete the
setup.
Set Code 39 barcode length to any supported length
1.
Scan the Code 39 minimum length limit, then scan the appendix data and
edit barcode for 0, and save it.
2.
Scan the Code 39 maximum length limit, then scan the appendix data
and edit barcode for 0, save and you are done.
Example of sending speed settings for the USB keyboard
If the client PC is weak, transmission errors are likely to occur. To adjust the
sending speed of the USB keyboard to a slower speed:
1.
Scan the custom send speed, then scan the appendix data and edit
barcode for 5, 0.
2.
Save to complete the setup.
Warning Beeps
When there is an abnormality in the data transmission, the scanner will sound
four consecutive beeps. Please check that the connection is OK.