iMotion SC111, User Manual

Page: 94 / 260

iWaylink Inc.
94
Search for barcodes that begin with a 1. If a barcode matches, move the
cursor back to the beginning of the data and send 6 characters followed by a
carriage return. Using the barcode above:
Command string: FE31F7F2060D
FE
31
F7
F2
06
0D
“Compare characters” command
Hex value for 1
“Move the cursor to the beginning” c
ommand
“Send a number of characters” command
Number of characters to send
Hex value for a CR
The data is output as:
123456
<CR>
EA - Move the cursor to the end
Move the cursor to the last character in the input message. Syntax = EA.
5-4-3 Search Commands
F8
—
Search forward for a character
Search the input message forward for “xx” character from the current cursor
position, leaving the cursor pointing to the “xx” character.
Syntax = F8xx where
xx stands for the search character’s hex value for its ASCII
code. Refer to the
ASCII Conversion Chart (Code Page 1252), for decimal, hex and character
codes.
Example: Send barcode data that starts after a particular character
Search for the letter “D” in
barcodes and send all the data that follows,
including the
“D.” Using the
barcode above:
Command string: F844F10D
F8
44
F1
“Search forward for a character” command
Hex value for “D”
“Send all characters” command