![background image](http://html1.mh-extra.com/html/imo/idrive2-xkl/idrive2-xkl_instruction-manual_2048131013.webp)
iDrive2 inverters Installation Guidelines
13
Environment
Conditions
Ensure foreign objects, such as metal, dust, oil, water can not enter into the inverter
(do not install the inverter on flammable materials such as wood);
Keep out of direct sunlight, oil mist, steam and vibration.
Altitude
Below 1000m
If the sea level is above 1000m, please derate 1% for every additional 100m.
Vibration
≤
5.8m/s
2
(0.6g)
Installation direction
The inverter should be installed on an upright position to ensure sufficient cooling
effect.
Note:
IMO XKL series inverters should be installed in a clean and well ventilated environment according to
enclosure classification.
Cooling air must be clean, free from corrosive materials and electrically conductive dust.
3.1.2 Installation direction
The inverter may be installed on the wall or in a cabinet.
The inverter must be installed in an upright position. Check the installation site according to the requirements
below.
Refer to chapter
Dimension Drawings
in the appendix for frame details.
3.1.3 Installation manner
The inverter can be installed in wall mounting (for all frame sizes):
Fig 3-1 Installation mounting
(1) Mark the hole location. The location of the holes is shown in the dimension drawings in the appendix.
(2) Fix screws or bolts to the marked locations.
(3) Position the drive onto backplate.
(4) Tighten the screws in the backplate securely.