IMO i3C Lite, User Manual

Page: 47 / 167

Page | 47
9.2 System Menu – Navigation and Editing
As mentioned above, the System Menu is started by pressing the System key on the
i ³C Lite. Then,
either press ESC to exit the System Menu, or use the

and

keys to select an item and press Enter
to display the item’s Sub -Menu.
A Sub-Menu generally shows a list of System Settings and their values. After opening a Sub-Menu, if
any of its System Settings are editable, the first System Setting that can be edited is highlighted. If
desired, the
 and  keys can be used to select a different System Setting to be edited.
At this point, either press
ESC to exit the Sub-Menu (returning to the Main Menu) or press Enter to
edit the highlighted System Setting. If Enter is pr essed, the System Setting’s value will be highlighted,
indicating that it is ready to be modified.
When modifying a System Setting’s value, use either the arrow keys (  →   ), the numeric keys, or
the appropriate touch screen icons to a new value.
The arrow keys are used to edit System Settings that have just a few possible values. Each time the
arrow key is pressed, a new possible value is displayed. When the desired value appears, press the
Enter key to save it; otherwise press the ESC key to cancel the edit.
The numeric keys are normally used to enter numeric System Settings.
In addition, to edit a single numeric digit, use the
 or → key to select the digit and then either press
a numeric key or use  or  to modify the digit. In any case, after entering the new desired value, press
the Enter key to save it; otherwise press the ESC key to cancel the edit.