23
8. INFORMATION.
By pressing the
button, access a menu that allows to
verify the functioning state of the CAR
V2
remote control.
If a determined value is not present “--” will be displayed.
The display of the “info” is subject to the boiler model and
the method of connection of the CAR
V2
remote control.
Press the button repeatedly to scroll the list
.
To go back to normal functioning mode, press the
button or wait 60 seconds.
The parameters that can be displayed are listed below:
- EXT T: external temperature (the optional external
temperature probe if present).
- RH %: relative humidity in the room.
- HF TMP: central heating circuit flow temperature.
- HR TMP: central heating circuit return temperature.
- DWIN T: DHW input temperature.
- DHW T: DHW output temperature.
- PAN T: solar collector temperature.
- CH PRS: system pressure, central heating circuit.
- SERVIC: days remaining before periodic maintenance.
- VER P “x”: “x” identifies the type of communication
protocol with the boiler in use:
VER PC
= CAR-Bus;
VER PI
= IMG-Bus.
The display shows the firmware version of the CAR
V2.
remote control
- ZONE: Not used on this model.
N.B.:
the sizes displayed depend on the type of boiler to
which the CAR
V2
remote control is connected.
