TXS-707
RECEIVER
MENU
SYNC
POWER
SET
1000
10
100
µV
dB
dB
dB
+3
0
-5
-10
-15
-20
-25
-30
40
35
30
25
20
15
10
30
300
RF
AF
SQ
FREQUENCY
CH
VOL
A
1
2
3
4
5
6
8
English
Deutsch
Deutsch Seite
Français
Français Page
Italiano
Italiano Pagina
Nederlands
Nederlands Pagina
Español
Español Página
Polski
Polski Strona
Receiver for a
Wireless Microphone
These instructions are intended for users without
any specific technical knowledge. Please read
these instructions carefully prior to operation
and keep them for later reference.
1 Overview
1
IR window for the infrared signal to set the
channel of the transmitter
2
Button SYNC
– To send the infrared signal for setting the
channel of the transmitter, briefly press
the button.
– To automatically scan a free transmis-
sion channel, keep the button pressed
until the display lights up in red and the
indicator segments of the numerals for
FREQUENCY start rotating.
3
Display; see page 11, chapter 5.5 for de-
tails
4, 5
Buttons
,
and button SET
– To change the transmission channel, the
squelch value or the output level for the
6.3 mm jack (10), press the button SET
repeatedly until the channel number
(CH), the arrow for the scale SQ or the
level value (VOL) starts flashing on the
display. While the corresponding indi-
cation keeps flashing, make the setting
with the buttons
and
.
– To activate or deactivate the keylock,
keep the button SET pressed for 2 sec-
onds.
6
POWER button
– To switch on the receiver, keep the button
pressed until the display lights up.
– To switch off the receiver, keep the but-
ton pressed until OFF appears on the
display.
7
Strain relief for the cable of the power
supply unit
8
Power supply jack DC INPUT to connect
the power supply unit provided with the
receiver
9
Audio output (XLR, bal.)
10
Audio output (6.3 mm jack, unbal.), the
signal level can be adjusted (page 11,
chapter 5.3)
11
Antenna jacks
2 Safety Notes
The product corresponds to all relevant directives
of the EU and is therefore marked with .
WARNING
The power supply unit uses dan-
gerous mains voltage. Leave ser-
vicing to skilled personnel only.
Inexpert handling may result in
electric shock.
•
The product is suitable for indoor use only.
Protect it against dripping water, splash water
and high air humidity. The admissible ambient
temperature range is 0 – 40 °C.
•
Do not place any vessels filled with liquid, e. g.
drinking glasses, on the product.
•
Do not use this product and immediately
disconnect the power supply unit from the
mains if
1. the receiver or the power supply unit is
visibly damaged,
2. a defect might have occurred after the
device was dropped or suffered a similar
accident,
English
English Page
