2011.01
Assembling the body on to the base
/ Montering av stolen og taburetten
STEP 1: Begin by putting body (I) on the already assembled chair base.
STEG 1: Sett stolen på den ferdigmonterte sokkelen.
STEP 2: Assemble armrests (II) by inserting screw (IV) half way into the arms.
Put the armrests on with screws sticking through the key-holes at the chairs steel arm.
Press the arm down and backwards while tightening the screws with hex key (V).
STEG 2: Monter armlenet (II) ved å sette skruene (IV) halvveis inn i armlenet.
Plasser armlenene på stolens stålarmer, slik at skruene treffer hullene i stålarmen.
Press armen ned og tilbake. Stram skruene.
STEP 3: Assembly ottoman by attaching ottoman cushion (III) on the already
assembled footstool base by inserting screw M6 (IV) throught hole and using
hex key (V) to tighten all screws.
STEG 3: Monter taburett ved å plassere puten (III) på den ferdigmonterte sokkelen
og fest skruene M6 (IV). Stram alle skruer.
Congratulations your chair is ready to enjoy
Gratulerer! Din nye stol er klar til å nytes!
NB : Please check bolts for tightness every six months or as needed!
NB: Vennligst sjekk at boltene fortsatt er stramme hver 6.måned eller etter behov!
NORDIC
ASSEMBLY INSTRUCTIONS / MONTERINGSANVISNING
BODY / STOL
I Body / Stol
x 1
x 1 pair / par
II Arms / Armlener
x 1
III Ottoman / Taburett
x 8
IV Screw / Skru M6
x 1
V
RING BASE / RINGSOKKEL