IMET B034 Technical Manual Download Page 25

 

TECHNICAL MANUAL

 

Page n°25 of 25

 

RF TRANSCEIVER MODULE 2.4GHz

 

B034

 

Doc. Revision°:0

 

Date: 11/01/2021

 

 

Technical Manual file.dot 

revisione n° 0 

data: 24/02/2020

 

 

 

IMET s.r.l. 

Via Ronche, 93 33077 Sacile (PN) 

 ITALY 

 Tel. (+39) 04347878 

 Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A. 

43483 CCIAA PN  http//www.imet.eu e-mail

info@imet.eu

 

 

A.3  Europe 

 
The  B034  module  is  an RED  Directive  (2014/53/EU)  assessed  radio  module  that  is  CE  marked  and 
has been manufactured and tested with the intention of being integrated into a final product.  
The B034 module has been tested to RED Directive 2014/53/EU Essential Requirements for Health 
and Safety (Article (3.1(a)), Electromagnetic Compatibility (EMC) (Article 3.1(b)), and Radio (Article 
3.2) and are summarized in Section 6.0 

“Approvals

 and Certification

 European Compliance Testing.  

 
To maintain conformance to the testing listed in Section 6.0 

“Approvals and Certification”

: European 

Compliance Testing, the module shall be installed in accordance with the installation instructions in 
this  data  sheet  and  shall  not  be  modified.  When  integrating  a  radio  module  into  a  completed 
product the integrator becomes the manufacturer of the final product and is therefore responsible 
for  demonstrating  compliance  of  the  final  product  with  the  essential  requirements  of  the  RED 
Directive. 
 

A.3.1  Labelling and User Information Requirements  
 
The  label  on  the  final  product  which  contains  the  B034  module  must  follow  CE  marking 
requirements. 
 

A.3.2  External Antenna Requirements 
 
Provided the integrator installing an assessed radio module with an integral or specific antenna and 
installed in conformance with the radio module manufacturer's installation instructions requires no 
further evaluation under Article 3.2 of the RED Directive and does not require further involvement 
of an RED Directive Notified Body for the final product.  
The European Compliance Testing listed in Section 6.0 

“Approval and Certifi

cation

 was performed 

using the antenna types listed in section 5.2 

External Antenna Types

.

 

Summary of Contents for B034


























Reviews: