Probe S series Configuration Guide
Set up Probe S series main gateway mine machine and split
satellite mine machine.
IMesh X Probes S suite configuration steps:
1. Configure the main gateway mine machine is connected to the Internet successfully (through
the web page 192.168.9.1)
2. Put the split satellite mine machine in the appropriate position, and then automatically set up
the network to realize mesh network coverage.
The detailed operations are as follows:
I. configuration of main gateway mine machine.
a. Remove the main gateway mine and the split satellite mine from the box;
Connect the main gateway mine power adapter and the network cable (connect the modem to
the blue WAN port on the main gateway mine using the included Ethernet cable).
Note: If you want to connect the principal gateway mine to the existing gateway, we recommend that
you turn off the WiFi of the existing gateway.
b. After the main gateway mine machine is powered on, the LED is white / blue overlapping LED
is lit, the device starts. Wait for the blue LED that overlaps with white to start blinking slowly,
indicating that the device has started successfully.
c. Connect the computer or mobile device (mobile phone or laptop) to the main gateway mine
using an Ethernet or WiFi connection.
Use Ethernet:
Use a network cable to connect your computer to the Ethernet LAN port of the main gateway
mine machine (the white network port of the main gateway mine machine).
Or use WiFi:
Connect to the Probe S WiFi network using the default WiFi network name (SSID)
iMeshX-xxxxxx-2G or iMeshX-xxxxxx-5G and password on the principal gateway mine label.
(for security reasons, users can modify the WiFi name and password later according to the system
background feature prompt or mobile phone APP custom modification.).
Follow these steps to configure through a web browser:
d. Start a web browser, access 192.168.9.1, and follow the prompts.
Summary of Contents for Probe S Series
Page 5: ......
