E190601X rev.6_ENG
May 30, 2022
29
who signals the execution of a soaking, the duration of which is highlighted in the center of the display.
Soaking can be interrupted, and the cycle restarted, by pressing the "START" icon
During soaking, the cycle can still be interrupted by pressing the STOP icon.
26. FAST FORWARD
It is possible to move within the cycle by entering the rapid movement environment with the "
ADVANCE “icon
.
The following screen appears on the display (for example) while the machine is on standby.
By pressing the "
" and "
" keys it is possible
to leaf through the cycles of which the program composed.
By pressing the "
✓
"
✓
key you can start the selected loop.
Pressing the button that depicts the door leaves the screen without performing any progress action.
The " " button
allows
the complete interruption of the program.
27. END OF EXECUTION OF A PROGRAM
At the conclusion of the program, open the porthole and download the machine.
Before proceeding to open the porthole, make sure that there is no water and that the temperature is not high.
In the case of a barrier machine (double door), to unhook the porthole press the button on near the display of
the clean side.
After unloading the machine and closing the inner door and the porthole, the message "CALL BACK BASKET"
