E190601X rev.6_ENG
May 30, 2022
26
20. TURNING ON THE MACHINE
Turn on the main switch that powers the machine.
For machines equipped with steam heating: open the gate to allow the entry of steam. To limit water hammer,
perform the opening operation slowly: from the closed position to the open position, within 1 minute.
Make sure that the emergency button (for models that provide for it) is in the resting position and that it has
not been activated.
Before starting the machine, always perform the safety check procedure (check the relevant paragraph).
When you turn on the machine, the display shows for a few moments the software version installed.
Please note that the software may take about a minute to load.
The following schemata appear on the display:
Proceed to the loading of the washing machine as described in the relevant paragraph and close the porthole
according to the procedure provided.
21. SELECTING A PROGRAM
After loading the machine and closing the porthole, the main MENU screen appears on display.
By tapping the "PROGRAMS" icon you can view the list of programs residing in the computer's memory.
The following screen appears on the display:
