SubVIS Orca II - User Manual
IMENCO AS
Visiting Address:
Kophaug 3, 5570 Aksdal, Norway
Office: +47 52 86 41 00
Org No: 923 005 749 MVA
Mail Address:
PO. Box 2143, 5504 Haugesund, Norway
Fax:
+47 52 86 41 01
www.imenco.com
5
1
General Description
1.1
Regarding these Instructions for Use
The intended use of these instructions is to provide and guide the operator/user of the equipment
with instructions on the technical specifics of the product, how it functions, the safety aspects of its
use, how to prepare, operate and maintain the product.
All information in this document is provided commercial in confidence and shall not be published or
disclosed, wholly or in part to any other party without Imenco’s written permission.
Copyright © 2019 IMENCO. All Rights Reserved.
1.2
The SubVIS Orca II camera
Figure 1, SubVIS Orca II camera
1.3
Main Features
•
HD 1080p/60fps Video Streaming over Ethernet
•
Low latency glass to glass: ≈
100 ms
•
Horizontal view angle 65° through a water corrected Fused Silica viewport
•
HTTP protocol for configuration and control
•
Embedded Computer “Imenco SmartBrain”
•
Optional interfaces to peripherals: RS232, RS485, GPIO
View port Camera
module
Imenco
Smart
Brain
Subsea
connector
Actual camera:
Camera block diagram:
DC power
Ethernet