10
ENGLISH
(B)
Hard Disk connected as Master device and CD-ROM or DVD-ROM connected as
Slave on the Primary IDE port; nothing connected to the Secondary IDE port.
Set the DVD Writer’s jumper to
MASTER
, and connect the DVD Writer as Master
to the Secondary IDE port. (If you are looking for a way of “FAST COPY/On the
Fly Copy”, this setting will bring you with a best result of copying speed.)
Remove the CD-ROM or DVD-ROM, change it to
SLAVE
and re-connect it to the
Secondary IDE port. Set the DVD Writer’s jumper to
MASTER
, and connect the
DVD Writer as Master to the Secondary IDE port. (This setting will bring you the
best result for usage of your Hard Disk. Thus, the access speed of the Hard Disk
will not be dragged down while the CD-ROM is working at the same time.)
