imants RotoKnife Mini, Manual

Page: 39 / 52

Maintenance of the machine
39
10.2 Wear parts
10.2.1 ReplaceCoulter discs Carousel
Before carrying out maintenance work or changing the machine’s settings, it must have
come to a complete standstill. The tractor’s engine must be switched off and the key must
have been removed from the ignition.
For reasons of quality and safety, only use original Imants® parts.
Dispose of any worn components in an environmentally responsible manner. Always
follow the locally applicable statutory regulations.
1. Make sure the machine is stable.
2. Remove the cover at the rear of the
machine.
3. Rotate the carousel.
4. Fit the cables to the shaft to be removed.
5. Remove the bolts from the bearing.
6. Lift the shaft out of the machine.
7. Replace the blades. Caution: they are
sharp!
8. Use new retaining rings.
9. Fit the shaft.
10. Fit the cover.
11. Make sure the shaft rotates smoothly. If it
does not, align it.
Table 9: