imagistics ix2700, User Manual

Page: 125 / 398

8 - 4 REMOTE FAX OPTIONS
Remote commands
Follow the commands below to access features when you are away
from the machine. When you call the machine and enter your R R
Passcode (3 digits followed by
), the system will give two short
beeps and you must enter a remote command.
Remote Commands Operation Details
95 Changing Remote
Retrieval/Fax Forwarding
1 OFF If you hear one long beep, the change is
accepted. If you hear three short beeps, you
cannot change it because the conditions have
not been met. (Example: registering
number). You can register your fax
forwarding number by using 4. FAX FWD NO
(See Page 8-1). Once you have registered
the number, your machine will change
automatically to FAX FWD:ON mode.
2 Remote Retrieval
3 Fax Forwarding
4 FAX FWD No.
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to
receive stored fax message(s). (See Page
8-1.)
3 Erase fax from the
memory
If you hear one long beep, you can erase fax
message(s) from the memory.
97 Check the Receiving Status
1 Fax You can check whether your machine has
received any fax message(s). If yes, you will
hear one long beep. If no, you will hear three
short beeps.
98 Change Receive Mode
1 EXTERNAL TAM If you hear one long beep, you can change
the Answer Mode.
If you hear three short beeps, you cannot
change it.
2 FAX/TEL
3 FAX ONLY
90 Exit After a long beep, you can exit remote
retrieval.