DFK 33UX252 Technical Reference Manual
18
Camera Controls
information, refer to the
IC Imaging Control
documentation sections on
VideoFormat
and
VideoFormatDesc
.
The following readout modes are supported:
·
Default
·
Skipping 2X
·
Skipping 2X vertical
·
Skipping 2X horizontal
5.1.4
Frame Rate
The frame rate is specified in frames per second and determines the camera's operating
speed.
The way the frame rate is controlled depends greatly upon which driver technology is
used to access the camera:
·
When using
USB3 Vision
, the frame rate is controlled through the
GenICam
feature
AcquisitionFrameRate
.
·
When using uvcvideo on Linux, the frame rate is selected from a list of available
frame rates.
·
When using IC Imaging Control, the frame rate is selected from a list of available
frame rates through APIs such as
Grabber::setFPS
or
ICImagingControl.DeviceFrameRate
.
The range of available frame rates depends upon other camera settings such as well,
pixel format, resolution and readout modes.
Parameter
Frame Rate
Minimum
Depending on Pixel Format, Resolution, and Readout
Mode
Maximum
Depending on Pixel Format, Resolution, and Readout
Mode
USB3 Vision: GenICam
AcquisitionFrameRate
The following tables show the maximum frame rate for some combinations of pixel
format and resolution.
8-Bit Bayer Raw
Width
Height
Maximum Frame Rate
2048
1536
120
1920
1080
182
640
480
608
