14
VTM6801
+
Installation and Operation Manual
Chapter 2: Installation
Installing 6800
+
Modules
Required Frames and Back Connector Types
The VTM6801
+
modules have double-width back connectors that can
be installed in an FR6802
+
XF or FR6802
+
QXF frame.
See the
FR6802
+
Frame Installation and Operation Manual
for details
on installing back connectors in an FR6802
+
frame.
Installing and Removing VTM6801
+
Modules
These modules require no specialized installation or removal
procedures. However, if installing both front and rear modules, ensure
that the back module is installed first before plugging in the front
module. When removing both the front and rear modules, ensure that
the front module is unplugged from the frame first, before removing the
rear module.
Caution
Before removing, inserting, or replacing a back module in
your frame, you must remove power from the frame. Failure
to power down the frame could result in damage to the frame,
modules, or power supply.
•
See the
FR6802
+
Frame Installation and Operation Manual
for
information about installing and operating an FR6802
+
frame and
its components.
•
See the
6800
+
Safety Instructions and Standards Manual
for
important information about safely installing your module.
Once you have installed your VTM6801
+
modules, you can connect
them to the appropriate input and outputs.
