Imagine Versio, Installation Manual

Page: 41 / 78

39 Chapter 2 | System Installation
Ve r s i o H a r d w a r e I n s ta l l a t i o n M a n u a l
© 2015 Imagine Communications
Proprietary and Confidential
Change the Power Supply
1 Push the release tab on the back of the power supply.
2 Pull the power supply out using the handle.
3 Replace the failed power supply module with the same model.
Note:
The part number for the Versio power supply module is
122-100037-00
.
4 Push the new power supply module into the power bay until the tab clicks
into the locked position.
5 Plug the AC power cord back into the module and the replacement power
module will automatically power-up.
Warning
Unplug the power cord
before removing the power
supply.
Release tab