Imagine Selenio X50, Installation And Operation Manual, Page: 12 / 136

Preface
Safety
xii
Waste from Electrical and Electronic Equipment
(WEEE) Directive
The European Union (EU) Directive 2002/96/EC on Waste from Electrical and Electronic
Equipment (WEEE) deals with the collection, treatment, recovery, and recycling of electrical
and electronic waste products. The objective of the WEEE Directive is to assign the
responsibility for the disposal of associated hazardous waste to either the producers or users
of these products. As of August 13, 2005, producers or users are required to recycle
electrical and electronic equipment at end of its useful life, and must not dispose of the
equipment in landfills or by using other unapproved methods. (Some EU member states
may have different deadlines.)
In accordance with this EU Directive, companies selling electric or electronic devices in the
EU will affix labels indicating that such products must be properly recycled. Contact your
local Sales representative for information on returning these products for recycling.
Equipment that complies with the EU directive will be marked with a WEEE-compliant
symbol, as shown in
Figure P-2 .
Figure P-2 WEEE Compliance Symbol
Safety
Carefully review all safety precautions to avoid injury and prevent damage to this product or
any products connected to it. If this product is rack-mountable, it should be mounted in an
appropriate rack using the rack-mounting positions and rear support guides provided. To
protect a frame from circuit overloading, connect each frame to a separate electrical circuit.
If this product relies on forced air cooling, all obstructions to the air flow should be removed
prior to mounting the frame in the rack.
If this product has a provision for external earth grounding, ground the frame to the earth
using the protective earth ground on the rear panel.
IMPORTANT! Only qualified personnel should perform service procedures.
Always disconnect the power supply before removing the lid.