Platinum™ VX
Installation and Operation Manual
Navigation
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
Version 1.2 | Page 93
Parametric Control
Read-Only (Status Parameters)
Read-only or status parameters feed back the current state of a specific parameter.
Figure 59:
Example of a Read-Only Parameter
List Parameters
List parameters contain a series of possible values for a specific parameter. Enumeration and string-list
parameter changes are always delayed. List parameters are identifiable by the arrow in the right corner
of the button. When you roll the mouse over a list parameter, the button highlights, and when you click
the arrow, available options are displayed. Select an item in the list to set the value for this parameter.
Figure 60:
Example of a List Parameter
Range Parameters
A range parameter uses an incremented slider to choose a value from all available values. Numeric
parameter values are represented by a sliding bar on the display screen. A progress bar indicates where
the current value is within the entire range the parameter presents. The current value is shown at the
right of the progress bar.
You can control the editable parameters by entering values, selecting options from drop down lists, or in
some cases by dragging a slider to the appropriate value.
Figure 61:
Example of a Range Parameter
