Platinum™ IP3
Installation and Operation Manual
Output Monitoring Modules
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 68
Output Monitoring Modules
PX-HSRAEC-OM Output Monitoring Module
The
PX-HSRAEC-OM
is a 3G-SDI/HD-SDI/SD-SDI output monitoring module for the IP3 Frame. The
module is designed to provide an output interface to monitor an output stream or preview an input
stream as selected by the control system.
The PX-HSRAEC-OM
is a dual slot card and it occupies slots 6 and 7 at the rear of the IP3 Frame.
For Video, there are 8 HD-BNC connectors at the outside edge of the module, 4 inputs and 4 outputs
Table 24:
Video Connectors
Inputs
Outputs
Slot
IN 1
OUT 1
6
IN 2
OUT 2
6
IN 3
OUT 3
7
IN 4
OUT 4
7
Note: The Audio connectors though present are not currently used or functional.
The module can be used in three different ways:
The PX-HSRAEC-OM can receive a copy of the signal being sent to a particular router output
The PX-HSRAEC-OM can monitor any of the router inputs in the frame
The PX-HSRAEC-OM can also be used in an "external routing mode" where a physical cable is
connected from the PX-HSRAEC-OM input port to an external source (destination or other test
equipment).
Notes
PX-HSRAEC-OM modules have 2 monitor ports per slot
Slot 6 has video OUT1, OUT2
Slot 7 has Video OUT3, OUT4.
Each PX-HSRAEC-OM module can only monitor one output at a time from an output card on the
same router
