18
DA-DHR/DH/DSR/DS/HR/H6802
+
Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 2: Installation
Installing 6800
+
Modules
Required Frames and Back Module Connector Types
These modules have double-width back connectors that can be installed
in an FR6802
+
XF or FR6802
+
QXF frame. See the
FR6802
+
Frame
Installation and Operation Manual
for details on installing back
connectors in an FR6802
+
frame.
These modules cannot be installed in 6800 / 7000 series frames.
Installing and Removing Modules
These modules require no specialized installation or removal
procedures. However, if installing both front and rear modules, ensure
that the back module is installed first before plugging in the front
module.
•
When removing both the front and rear modules, ensure that the
front module is unplugged from the frame first, before removing
the rear module.
•
See the
FR6802
+
Frame Installation and Operation Manual
for
information about installing and operating an FR6802
+
frame and
its components.
•
See the
6800
+
Safety Instructions and Standards Manual
for
important information about safely installing your module.
Once you have installed the modules, you can connect them to the
appropriate input and outputs.