Selenio™ Network Processor
User Guide
Configuring Processors
© 2019 Imagine Communications Corp.
Proprietary and Confidential.
May 2019 | Page 80
Note:
When in 2022-6 mode, due to a bandwidth routing limitation, do not configure more than six
channels in a Processor to receive at 1080p/50 or 1080p/59, or the switch mode will revert to Make
After Break mode resulting in non-clean switches.
Configuring a Personality
SNP has multiple personalities, as described in the following sections. Personalities are determined on a
per-processor basis.
To change the personality on a Processor, follow these steps:
1.
On the Dashboard, with an element selected, click the
Edit
button for a Processor.
2.
On the Configure Processor dialog box, choose the
Personality
tab.
Personality
•
Conversion
•
Remap
•
Sync
FPGA Status
(read-only)
3.
When you are done making your selections, click
Apply Personality
.
4.
Reboot your SNP.
The
FPGA Status
field displays
Loading
until the change is complete.
The number of supported channels will depend on the personality assigned to a processor, as described
in the following table:
Personality
Per Processor
Maximum per SNP
Synchronizer
•
8 x HD
•
4 x HD + 1 x UHD
•
2 x UHD
•
32 x HD
•
16 x HD + 4 x UHD
•
24 x HD + 2 x UHD
•
8 x UHD
•
others
