Selenio
TM
BNP User Guide, Release 3.7.1
240
- Use Case Configuration Examples
Figure 173. Program with placeholders groomed - ESs grayed out
Note:
When creating Placeholder ETV ESs, two new descriptor rules with default values will be created
for each ES used as a placeholder. The Descriptor Data information in these rules may be edited,
if necessary. In this case, there will be 4 new descriptor rules (2 for EISS and 2 for EBIF) that are
created in the
Manage Descriptor Rules
window.
To view the descriptor rules created with the placeholder ESs:
1.
From the
Outputs panel
of the
Grooming -> Mapping
window, right-click on the program you
just groomed and select
Manage Descriptor Rules
from the pop-up menu.
The
Manage Descriptor Rules
window will open, showing two descriptor rules for each ES
placeholder:
Figure 174. Manage Descriptor Rules - EISS & EBIF additions
2.
Click
Cancel
to close the
Manage Descriptor Rules
window.
Pre-Bound EBIF Passthrough (no DPI)
In pre-bound EBIF passthrough on a non-DPI program, the network stream contains the pre-bound
ETV data streams, and the BNP is configured to play the input ETV streams on the output.
