Imagine communications Selenio 6800 SFS6803+OP+SFS+, Installation And Operation Manual

Page: 11 / 118

SFS6803
+
and OP
+
SFS
+
Installation and Operation Manual
ix
Product
Servicing
Except for firmware upgrades, SFS6803
+
and OP
+
SFS
+
modules are not designed for field
servicing. All hardware upgrades, modifications, or repairs require you to return the
modules to the Customer Service center.
Returning a
Product
In the unlikely event that your product fails to operate properly, please contact Customer
Service to obtain a Return Authorization (RA) number, and then send the unit back for
servicing.
Keep at least one set of original packaging in the event that a product needs to be returned
for service. If the original package is not available, you can supply your own packaging as
long as it meets the following criteria:

The packaging must be able to withstand the product’s weight.

The product must be held rigid within the packaging.

There must be at least 2 in. (5 cm) of space between the product and the container.

The corners of the product must be protected.
Ship products back to us for servicing prepaid and, if possible, in the original packaging
material. If the product is still within the warranty period, we will return the product prepaid
after servicing.
References
ANSI/SMPTE 259M-1997
10-Bit 4:2:2 Component and 4fsc NTSC Composite Digital Signals–Serial Digital Interface
ITU-R BT.601-5
Studio Encoding Parameters of Digital Television for Standard 4:3 and Wide-Screen 16:9
Aspect Ratios
SMPTE 292M-1999
Bit-Serial Digital Interface for High-Definition Television Systems
ITU-R BT.709-4
Parameter Values for the HDTV Standards for Production and International Programme
Exchange
SMPTE 291M-1998
Ancillary Data Packet and Space Formatting
SMPTE RP 184-1996
Specification of Jitter in Bit-Serial Digital Systems
ANSI/SMPTE 276M-1995
Transmission of AES/EBU Digital Audio Signal Over Coaxial Cable