Setup & Operator Manual Compass Product Line
L610-0220 REV A
8
7.
Compass Accessories & Disposables
7.1.
Item 7: X610-0208 – Bag, Sterile, Compass Contour, 17”x 27” with contoured notch
7.2.
Item 7: C610-0209 – Bag, Sterile, Compass Frame, 28”x 20”
8.
Instructions for Operation & Usage
8.1.
Vendor OEM vertical articulation spring arms weight and connection data.
8.1.1.
Compass Contour and Frame weight varies from 10 – 11 kg/22 – 24 lbs.
8.1.2.
Use only vendor OEM supplied vertical articulation spring arms having a spring force rating
that supports a 10-11 kg load and will accept a Compass connection shaft diameter of
between 28.5-29mm.
8.2.
Emergency Patient Access
8.2.1.
For emergency access to patient, manually rotate and move the shielding barrier away from
patient area to a safe distance and location for emergency access.
8.3.
Compass Product attachment to vertical spring arms will vary per OEM vendor. See
spring arm manufacturer’s installation & user manual for instructions.
8.3.1.
On the vertical spring arm connection end, remove small metric screw from the collar or
plug. Slide collar up (Ondal) or remove insert plug (OASYS) and remove key (Do not lose).
Having key ready, move Compass shaft hub into vertical arm shaft hole, insert key, slide
collar over (Ondal) or insert plug (OASYS), insert metric screw and tighten (See photos
below).
8.4.
Vertical arm adjustments for vertical limits
8.4.1.
Adjust vertical heights and spring force per OEM vendor adjustment manual instructions.
Height and Force adjustments are up to the user’s discretion.
WARNING!
In the event of an emergency where direct accessed to
patient is needed, do these steps quickly to move
Compass Radiation Shield Barrier away from patient.
Key
