WideTEK WT42 / WT48
4.3.3 Preview
This section informs the user about the selected preview scaling. The default preview
scaling is 16.
If the preview function is active (toggled on and off using FK6), a preview scan can be
started by pressing FK4. Following the preview scan, the TFT color display shows the
scan result.
The higher the value for the preview scaling is, the smaller the picture size in the TFT
color display.
The preview scaling can be set from 3 (Auto) to 16. If the preview scaling is set to 3 the
preview image is scaled to the size of the TFT color display.
If the preview image exceeds the size of the TFT color display, the image can be scrolled
using the four cursor keys (up / down / left / right). Refer to chapter 3.3.
4.3.4 Scan
Resolution
This section shows the selected scan resolution.
4.3.5 Print
Resolution
(only displayed in scan mode “Scan2Copy”)
This section shows the selected print resolution.
The available resolutions depend on the selected printer.
4.3.6 Printer
(only displayed in scan mode “Scan2Copy”)
This section shows the name of the selected printer.
4.4 Slider
A slider is always displayed when a range of values is available.
Above the slider, a small window shows the decimal value. The slider is controlled by the
function keys FK1 and FK2.
4.5 Copy
Counter
(only displayed in scan mode “Scan2Copy”)
The number of copies is set by the numeric keypad.
The maximum value is 10.
Page 20
Keyboard Operation Manual